Cutting lines N2990/2200 5 + 7 heads
Cutting lines N2990/2200 5 + 7 heads specification
The cutting line N.2990/2200-5+7C counts with:
- 1 Intermediate motorized plastic rollers table, model N.2274.
- 1 longitudinal cutter with 5 cutting heads ø 600 and mobile bridge, model N.8000-L-5C.
- 1 transverse cutter with 7 cutting heads ø 600 and mobile bridge, model N.8000-L-7C.
- 2 motorized band cutting tables, model N.2304.
- 1 table with stone sheet selection stops, N. 2590.
- 1 double displacement table with motorized rollers, model N.2585.
- 1 motorized band table for material output, model N.2426.
Cutting lines N2990/2200 5 + 7 heads documentation
Cutting lines N2990/2200 5 + 7 heads technical sheet
Our cutting line N.2990/2200-5+7C has been designed aiming maximum production capacity with minimum labour force, as well as the absolute reliability of all its parts.
The production line overall dimensions have been adjusted to the customer needs, following his criteria about the produced pieces dimensions and the final products obtained.
The whole line features better robustness and reliability in all its subassemblies, being them all designed to support the hardest working conditions. This is one of the most relevant aspects where we can offer our long time experience in designing and manufacturing stone processing machines for this sector.
One of the great advantages of the machines integrating this production line is that all the designs are already tested solutions. They only differ from our standard machines in their overall dimensions, but not in all incorporated components.
With the automatic loading trolley NDF-1289-P/V (optional), the longitudinal cutter is fed with material from a stacker. Panels are removed using suction cups connected to a vacuum pump that tilt and place them in a horizontal position, ready to move to the cutting unit. Panels from the horizontal stacker are placed waiting to enter in the production line in such a way that the following panels maintain the alignment being unnecessary to adjust the cutter starting point.
The intermediate rollers table not only joins the feeding trolley and the longitudinal cutter but also acts as an intermediate storage so that the cutting unit stop times are very low.
The 5 heads longitudinal cutter N.8000-L-5C over rolling bridge and the 7 heads transverse cutter N.8000-T-7C are equipped with the latest technology, both in their mechanical design and in their electronics. It is worth mentioning the use of a high precision and stiffness linear guide system with linear recirculating ball bearing unit by the gripper cutting head bridge during the cutting works. The bridge is supported by two beams, being parallel to the cutting table the first and perpendicular, the second.
The sliding disc holder cutting heads also move vertically guided by a linear recirculating ball bearing unit and operated by a laminated ball screw with recirculating ball screw nut in order to achieve a quick and precise positioning and being all perfectly protected by PVC bellows. The gripper cutting heads have translation movement thanks to a gear motor controlled by a frequency inverter and positioning magnetic scale in the X axis and cutting head operated by a ball screw and an electric gear motor for vertical positioning in the Z axis. The cutting heads positioning is simultaneous thanks to their independent inverters.
The N.2304 cutting tables consist of a steel structure with a machined top plane where the motorized transport band lies. The band is rubber covered to avoid slab slipping during the cutting process. A stone blocking device, placed in the second transverse cutter table, allows reducing times during the transverse cut process considerably.
The table N. 2590, placed just after the longitudinal cutter, counts with a stop system, pneumatically driven, that allows the selection of the previously cut stone strips according to the width for their further processing in the longitudinal cutter.
The second table N.2585 counts with a towing device to join and align the strips before their processing in the transverse cutter, and to remove waste from the longitudinal cut.
The unloading table with band N. 2426 count with a steel profiles frame with a transport band to unload the cutting table while the transverse cutter receives and starts cutting the next panel.
The palletising robot N-3530 (optional) with vacuum suction cup is specially design to do automatic palletising tasks on the basis of the same operation principles applied in the Nodosafer standard palletising. It also offers many advantages such as work process optimisation, shorter cycle times and efficient use of the down times. The reception suction cup, with a special design, counts with a rectangular plate, able to support horizontal loads of up to 120 kilograms.
All dangerous working areas are isolated from personnel access by means of protection fences and optical barriers.
All machines and cutting heads count with a centralized greasing system for an easy and quick maintenance.
As for electricity and control, it is worth mentioning the use of last generation automatons with programs specifically designed by our technicians, so that the machine programming is as easy as possible, avoiding unnecessary loss of time. The operation cycle programming and the visualization of this sequence is made over two screen operator terminals where all the cutting parameters are displayed.
| Table dimensions | 1880x3200 mm |
| Frame dimensions | 2560x1140 mm |
| Central vacuum | 30 m3/h / 1.35 CV |
| Hydraulic control unit | 5,5 CV |
| Trolley advance engine power | 3 CV |
| Table engine power | 1,5 CV |
| Trolley displacement speed | 5 m/min |
| Stone sheet displacement speed | 11.5 m/min |
| Maximum working width | 2200 mm |
| Table width | 2930 mm |
| Maximum table length | 3500 mm |
| Maximum working width | 2200 mm |
| Forward speed | 11.5 m/min |
| Drive engine power | 1.5 HP |
| Machine width | 4220 mm |
| Rolling ways length | 6000 mm |
| Maximum disks distance 1-5 | 2200mm (inside) |
| Minimum disks distance 1-2-3-4-5 | 300 mm |
| Cutting disks diameter | 600 mm |
| Maximum height of the cutting pieces | 150 mm |
| Disk engine power | 15HP (5) |
| Total power installed | 82 HP |
| Water consumption per disk | 15-20 l/min |
| Machine width | 5370 mm |
| Rolling ways length | 5500 mm |
| Maximum disks distance 1-3 | 3500 mm (inside) |
| Minimum disks distance 1-2-3-4-5-6-7 | 300 mm |
| Cutting disks diameter | 600 mm |
| Maximum height of the cutting pieces | 150 mm |
| Disk engine power | 15HP (7) |
| Total power installed | 132 HP |
| Water consumption per disk | 15-20 l/min |
| Table width | 2960 mm |
| Max. Table length | 4044 mm |
| Max. Band width | 2200 mm (inside) |
| Band displacement speed | 11.5 m/min |
| Drive engine power | 3 HP |
| Table width | 2930 mm |
| Max. table length | 3900 mm |
| Max. working width | 2200 mm |
| Rollers forward speed | 11.5 m/min |
| Roller drive engine power | 1.5 CV |
| Centring displacement speed | 5 m/min |
| Transversal displacement engine power | 2.5 HP |
| Table width | 2930 mm |
| Max. table length | 3700 mm |
| Max. working width | 2200 mm |
| Rollers forward speed | 11.5 m/min |
| Roller drive engine power | 1.5 HP |
| Table width | 2930 mm |
| Max. table length | 4300 mm |
| Max. working width | 2200 mm |
| Rollers forward speed | 11.5 m/min |
| Roller drive engine power | 3 KW |
| Max. load | 120 kgs. |
| Mínimum piece size | 300 x 300 mm |
| Central vacuum | 100 m3/h |
| Installed power | 25 CV |
| Minimum cycle time. | 10” sec |
Cutting lines N2990/2200 5 + 7 heads videos
Nodosafer is a company that has 40 years of experience in the design and manufacture of machinery and equipment for the natural stone transformation and machining sector.
